Manual type PPG thickness tester

Short Description:

The manual PPG thickness gauge is suitable for measuring the thickness of lithium batteries, as well as measuring other non-battery thin products. It uses weights for counterweight, so that the test pressure range is 500-2000g.

Range: 150*100*30mm

Test Pressure: 600-1200g

Z-axis working distance: 50mm

Send email to us

Product Detail

Product Tags

Introduction

The PPG is suitable for measuring the thickness of lithium batteries, as well as measuring other non-battery thin products. It uses weights for counterweight, so that the test pressure range is 500-2000g.

Operating steps

2.1 Put the battery into the test platform of the thickness measuring machine;
2.2 Lift the test pressure plate, so that the test pressure plate naturally presses down for testing;
2.3 After the test is completed, lift the test press plate;
2.4 Remove the battery until the whole test step is completed.

The main accessories of the equipment

3.1.Sensor: Altitude dial indicator.
3.2.Coating: Stoving varnish.
3.3.Material of parts: steel, grade 00 jinan blue marble.
3.4.Cover material: Steel and aluminum.

Technical parameters

S/N	Item	Configration
1	Effective test area	L200mm × W150mm
2	Thickness range	0-30mm
3	Working distance	≥50mm
4	Reading resolution	0.001mm
5	Flatness of marble	0.003mm
6	Measurement error of one position	Put a 5mm standard gauge block between the upper and lower pressure plates, repeat the test 10 times at the same position, and its fluctuation range is less than or equal to 0.003mm.
7	Comprehensive measurement error	A 5mm standard gauge block is placed between the upper and lower pressure plates, and the 9 points evenly distributed in the pressure plate are measured. The fluctuation range of the measured value of each test point minus the standard value is less than or equal to 0.01mm.
8	Test pressure range	500-2000g
9	Pressure transmission mode	Use weights to pressurize
10	Sensor	Altitude dial indicator
11	Operating environment	Temperature：23℃±2℃ Humidity：30～80%
11	Operating environment	Vibration：＜0.002mm/s，＜15Hz
12	Weigh	40kg
13	***Other specifications of the machine can be customized.